Whirlpool AWM1019 washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM1019 washing machine

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 13, 2013 at 12:15 pm #77118
    Alanj
    Participant

    Hi guys, above machine has a fault code relating to a board communication fault.
    The machine is in a local hotel and so gets a lot of use.
    I referred them to Whirlpool because there are 4 boards on the machine and due to cost.
    The hotel phoned me today asking if I new which board was faulty as the Whirlpool engineer said he could not identify the fault/faulty board without replacing all 4 boards?
    Do Whirlpool not have the facilities to repair their own appliances by fault finding procedures?

    Mystified
    Alan

    September 13, 2013 at 2:07 pm #401096
    iadom
    Moderator

    Re: Whirlpool AWM1019 washing machine

    Moved to correct forum. :rolls:

    Should not be in General Trade forum.

    September 17, 2013 at 9:55 pm #401097
    Alanj
    Participant

    Re: Whirlpool AWM1019 washing machine

    Hi again, does anyone have a manual for this machine.

    Alan

    September 19, 2013 at 2:44 pm #401098
    jag-12
    Participant

    Re: Whirlpool AWM1019 washing machine

    Try removing and pinching the various connectors between the boards.
    Have had this fault a couple of times and this has solved it

    September 22, 2013 at 7:20 pm #401099
    Alanj
    Participant

    Re: Whirlpool AWM1019 washing machine

    Cheers Jag, will give it a go.

    Alan

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.