Whirlpool AWM8103/s front loader

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM8103/s front loader

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 21, 2005 at 7:43 am #12715
    robbra
    Participant

    Customer rang with fault F8..partly filling then F8.
    Going Monday so any ideas what to look for as the code is missing on the sticky page.
    Thanks in advance.
    Rob

    October 21, 2005 at 9:06 am #151299
    Dave_Conway
    Participant

    Re: Whirlpool AWM8103/s front loader

    According to the Whirlpool tech info, F8 doesn’t exist 🙁

    Suspect control unit perhaps ?

    Dave.

    October 21, 2005 at 1:54 pm #151300
    admin
    Keymaster

    Re: Whirlpool AWM8103/s front loader

    On a dishwasher F8 is “water level failure” Might just have a bearing to the auto washer!


    Kevin

    October 22, 2005 at 9:51 pm #151301
    whiskeyjack6058
    Participant

    On whirlpool w/m’s the motor comes in almost straight away, Im not sure what the F8 code is, but I would check the carbon brushes, I have had the same fault with whirlpool autos several times.

    October 24, 2005 at 2:47 pm #151302
    robbra
    Participant

    Re: Whirlpool AWM8103/s front loader

    Hi,
    Thanks for the replies. The display had gone faulty and was FH.She has decided to get rid as this is a troublesome Whirlpool and I am getting her a new machine.
    Rob

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.