Whirlpool AWO/C 0714

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWO/C 0714

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 24, 2018 at 5:17 pm #94309
    Toni
    Participant

    Hi
    F08 fault showing on this after a few seconds.
    I tested the heater which is ok, so assuming the module faulty ?
    Any advise appreciated

    July 24, 2018 at 5:52 pm #456963
    electrofix
    Moderator

    Re: Whirlpool AWO/C 0714

    manual says

    Dave

    July 27, 2018 at 11:20 pm #456964
    Grendal
    Participant

    Re: Whirlpool AWO/C 0714

    If the heater measures ok it will be the board (check continuity and ir)

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.