Whirlpool Awz 410

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool Awz 410

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 3, 2008 at 3:18 pm #39929
    Galway
    Participant

    hi everyone ,called to this today and customer said drum was not turning
    and that it was only takiking in water in spurts.checked all the usual suspects but no joy.if you set it to spin it just keeps draining but no drum action.the pressure switch seems ok (1 level),brushes ok .
    Any ideas?
    Thanks

    October 3, 2008 at 3:23 pm #264186
    PGS
    Participant

    Re: Whirlpool Awz 410

    Try search theres loads there good luck

    October 12, 2008 at 9:54 pm #264187
    seanopatch
    Participant

    Re: Whirlpool Awz 410

    change module had similar problem

    October 12, 2008 at 10:41 pm #264188
    Micky 32
    Participant

    Re: Whirlpool Awz 410

    It’s usually one of the white ceramic resistors on the module than goes.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.