Whirlpool AWZ 410 erratic cycles.

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Whirlpool AWZ 410 erratic cycles.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 6, 2007 at 9:49 am #29530
    shyamnrcb
    Participant

    Hi there, Whirlpool Washer-Dryer AWZ 410-1000, Made in Italy, has erratic cycle: starts in a jerk, then is dead, or is fine for 5 mins then stops, sometimes no discharge and yet other times heater is on by itself. I think control board EL MARC, ANACONA I 220-240 V, 50 Hz, 1000 RPM, DMPU/42 R5, 18/02/2002- 54602 1401 4572 must be replaced. Any help with diagnosis/ replacement of specific components.
    Thanks.
    Shyam

    August 6, 2007 at 6:45 pm #223517
    Penguin45
    Participant

    Re: Whirlpool AWZ 410 erratic cycles.

    I would check function of water level switch, but otherwise sounds like the PCB.

    Part number 546021401 – an email to spares@ukwhitegoods.co.uk for prices and ordering.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.