Whirlpool AWZ514D

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWZ514D

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 1, 2017 at 11:37 am #90487
    rolf
    Participant

    Hello.
    Got a Whirlpool AWZ514D 858042315000
    The reported fault was F04 and machine not starting. Could anyone confirm F04 is NTC problem because it started and heated for me 😕 . Anyone’s experience with this fault would be appreciated.
    Thanks.

    February 1, 2017 at 1:51 pm #444956
    electrofix
    Moderator

    Re: Whirlpool AWZ514D

    cannot confirm fault code but ntc faults can come and go with ambient temp. Have had repairs where machine would start if you poured a pan of hot water in first

    Dave

    February 1, 2017 at 4:55 pm #444957
    Grendal
    Participant

    Re: Whirlpool AWZ514D

    Its a meloni built machine I dont have any fault codes for it tbh I dont think it uses them

    February 1, 2017 at 10:50 pm #444958
    rolf
    Participant

    Re: Whirlpool AWZ514D

    Think it must do Grendal, she said she it was E04. Unless shes after a new washer off the landlord.
    According to the interweb it could be NTC or Door lock, depending on who you believe. Someone must know.

    February 2, 2017 at 2:09 pm #444959
    Grendal
    Participant

    Re: Whirlpool AWZ514D

    It is the door lock saying that 9 times out of 10 any faults on those is the board

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.