Whirlpool BSO801 WH

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Whirlpool BSO801 WH

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 12, 2006 at 11:19 am #14745
    Denno
    Participant

    When slecting oven and turn dial to apply heat, the red light and heat does not start until the dial is around the 125 mark. I have recently replaced the thermostat on this and all worked well for 6 months, I have checked the thermostat and it is in the correct place etc.

    I had a friend to look it over and he thinks it may be the variable thermostat

    I would like to know if this diagnosis is viable and also where I can purchase the part from

    Any help and suggestions will be greatly appreciated

    January 12, 2006 at 12:38 pm #160672
    Dave_Conway
    Participant

    Re: Whirlpool BSO801 WH

    Unless the knob is damaged it’s definitely the thermostat.

    Can you check for the product code starting 85….. please as there are several versions of this oven.

    I’ll be able to identify the correct thermostat for you then 🙂

    Dave.

    January 12, 2006 at 4:44 pm #160673
    Denno
    Participant

    Re: Whirlpool BSO801 WH

    The knob is not damaged

    The serial number is 8541 396 15050 14 9837 000750

    January 12, 2006 at 5:27 pm #160674
    Dave_Conway
    Participant

    Re: Whirlpool BSO801 WH

    Part number 481928228227 at £30.18 inc VAT and carriage in that case 😀

    An email to spares@ukwhitegoods.co.uk please if required.

    Dave.

    January 12, 2006 at 6:21 pm #160675
    Denno
    Participant

    Re: Whirlpool BSO801 WH

    Many Thanks Dave

    Is this part the variable thermostat? 😆

    January 12, 2006 at 8:43 pm #160676
    Dave_Conway
    Participant

    Re: Whirlpool BSO801 WH

    Denno wrote:Is this part the variable thermostat?

    Yep, that’s the one 🙂

    Dave.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.