Whirlpool dishwasher ADP 4601 cuts out

[washtec]

I have this cutting out problem with the appliance cutting out when the motor starts to run and read a post by electrofix explaining about the bucket capacitor on the pcb repair section….so I ordered and replaced the 10v 1000uf cap on the board and it worked for 5 washes and then back to cutting out. I was wondering if I replaced the correct cap and if anyone has any more experience of this fault, there is a round blue cylinder type component with .102 written on it but dont know if it is a capacitor and the other caps are
1x 330 uf
2x 4.7 uf
2x small 10uf caps

the larger 1000uf 10v cap that I changed had blown although the original had not shown signs of domeing or damage.

thankyou in advance
>

paul

[washtec]

Bumpety bump, any help would be appreciated.

[Author]

Posts