Whirlpool dw

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool dw

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 7, 2017 at 11:47 am #92098
    pmb
    Participant

    Hey guys I have a Ignis/Whirlpool ADL348 dishwasher which loses power in the wash pump after about 5-10 minutes on the intensive wash. If you open the door and close it gently the pump still runs slow, however if you slam it it will run normally again for a while before slowing. When it slows it barely moves the water. Strangely it is fine on the quick wash.
    I tried replacing the wash pump complete with new capacitor, checked the wires in the door and tightened connections on the PCB but still wrong.
    I am thinking possibly PCB can anyone help?
    Thanks, Darren

    September 14, 2017 at 6:14 pm #450269
    keithwilliams
    Participant

    Re: Whirlpool dw

    look in the simple pcb repair thread. i think your answer is there.

    September 15, 2017 at 8:27 am #450270
    pmb
    Participant

    Re: Whirlpool dw

    Thanks a lot, I must admit it didn’t occur to me to look there.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.