Whirlpool error codes

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Whirlpool error codes

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 3, 2016 at 8:42 pm #88695
    squires80
    Participant

    Hi,
    I have been looking at a whirlpool awo/d 6107, which goes to fault very shortly after starting a cycle. I’ve tried looking for fault codes to help diagnose the problem, but can’t find a reference anywhere. The fault LEDs are as follows (x is on, o is off) o x x o o with the service light on too.
    I’ve taken a measurements:
    inlet valves are 38Kohms, ntc 10k ohms @ 25c, heater 28ohms.
    Any advice?
    Thanks

    July 3, 2016 at 8:46 pm #439036
    bazza500
    Participant

    Re: Whirlpool error codes

    Inlet valve seems high. I would expect 3.5-4K

    July 3, 2016 at 9:09 pm #439037
    squires80
    Participant

    Re: Whirlpool error codes

    sorry typo, was meant to be 3.8

    July 4, 2016 at 6:57 pm #439038
    squires80
    Participant

    Re: Whirlpool error codes

    any ideas what fault the leds are showing?

    July 7, 2016 at 6:33 am #439039
    squires80
    Participant

    Re: Whirlpool error codes

    Does anyone know how to make a good tuna sandwich?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.