whirlpool Ikea Dishwasher DWH B10W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool Ikea Dishwasher DWH B10W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 8, 2010 at 9:25 am #53052
    Ashby
    Participant

    Hi, Anyone have the fault codes for this one please? It stops a few mins into the wash and then the green led flashes 4 times then a short pause.
    Many thanks.
    Ashby

    March 8, 2010 at 9:34 am #314214
    Penguin45
    Participant

    Re: whirlpool Ikea Dishwasher DWH B10W

    No drain detected in the time allowed.

    P2 – known error codes thread.

    Chris.

    March 8, 2010 at 9:55 am #314215
    Ashby
    Participant

    Re: whirlpool Ikea Dishwasher DWH B10W

    Hi Chris, thanks for your reply. It drains fine? I did notice that after the draining it wouldn’t fill? but then other times it will fill ok,start to wash and then the fault comes up? does’nt always take the wash powder either?
    Ashby :rolls:

    March 8, 2010 at 7:42 pm #314216
    Penguin45
    Participant

    Re: whirlpool Ikea Dishwasher DWH B10W

    The key word was “detected”….. The grid for the level switch in the sump will be full of congealed fat, stopping the diaphragm moving, or the microswitch on the outside will have failed.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.