whirlpool tumble stopped working

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › whirlpool tumble stopped working

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 30, 2015 at 6:25 pm #86867
    dapz15
    Participant

    Hi, I have a whirlpool AZ9750 condenser tumble dryer which has just stopped working. Worked fine, went to reuse about 10mins later and nothing, no lights, no sign of life. We have checked plug fuses and socket. Any advise would be very welcome. (serial numbers on inside door are 8575 975 115011 and 07 1204 000418) Thank you

    November 30, 2015 at 11:26 pm #433242
    kwatt
    Keymaster

    Re: whirlpool tumble stopped working

    Probably an overheat stat that’s tripped.

    K.

    December 7, 2015 at 8:06 pm #433243
    dapz15
    Participant

    Re: whirlpool tumble stopped working

    Hi thanks for your reply. Is this a serviceable part that can be repaired or replaced. Thanks, much appreciated

    December 7, 2015 at 11:15 pm #433244
    kwatt
    Keymaster

    Re: whirlpool tumble stopped working

    Is this a UK model as nothing comes up under that?

    K.

    December 8, 2015 at 6:39 pm #433245
    dapz15
    Participant

    Re: whirlpool tumble stopped working

    Hi, was written incorrectly. The number is actually AZB9750. There are other serial numbers on the inside of the door:
    8575 975 15011
    07 1204 000418

    Many thanks for any help you can offer

    December 8, 2015 at 6:43 pm #433246
    kwatt
    Keymaster

    Re: whirlpool tumble stopped working

    I’m not that familiar with that machine but, mains filter if its totally dead, then power switch then stats are what to check.

    K.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.