whirlpool (usa) Top loader Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › whirlpool (usa) Top loader This topic has 5 replies, 3 voices, and was last updated 18 years, 4 months ago by rocker. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts December 9, 2007 at 1:10 pm #32862 rockerParticipant Model SM8281115-A. require a in-line fuse located behind the fasia console (value not know) where can I buy these parts please. John December 9, 2007 at 1:15 pm #236657 gegsyParticipant Re: whirlpool (usa) Top loader IIRC its an 8 Amp 20mm, stick a 10 Amp in as its still 13Amp protected in plugtop whereas US don’t have fused plugtops hence the internal fuse 😀 Greg December 9, 2007 at 1:42 pm #236658 rockerParticipant Re: whirlpool (usa) Top loader Greg, this is not protected by 13amp fuse,as its direct wired from fuse board via switch only. So need to fit correct fuse. Do connect sell these fuses or where !!. cheers John December 9, 2007 at 2:05 pm #236659 EFSParticipant Re: whirlpool (usa) Top loader If you go on connections and type in 10A time lag fuse you will get the right one. 😉 Steve December 9, 2007 at 2:14 pm #236660 rockerParticipant Re: whirlpool (usa) Top loader Cheers Steve will do. December 9, 2007 at 2:27 pm #236661 gegsyParticipant Re: whirlpool (usa) Top loader Cheers Steve :tup: Greg Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In