WHITE KNIGHT 28008T

[chris211]

Hi been to look at a white knight spin dryer mod 28008T that wont balance the load to spin just keeps banging on the wall of machine, when empty spins fine but as soon as you put anything in it bangs about have tried different loads anddiferemt types of material but still doing the same. any ideas

[Martin]

Re: WHITE KNIGHT 28008T

Is this a little cylindrical spinner you are talking about? If so then one or more of the rubber mountings is either broken or perished I would think?

[chris211]

Re: WHITE KNIGHT 28008T

yes it is small cylindrical spinner have checked rubber mountings all three are in place and dont appear to be perished unless they have stretched somehow, but i was thinking along the same lines as you prob is the rubber moutings

[wilf]

Re: WHITE KNIGHT 28008T

check the capacitor it might not be working under load and wont reach a speed to overcome the balance at startup speed

wilf

[wilf]

Re: WHITE KNIGHT 28008T

chris have you checked that the can is not slightly bent!

wilf

[Author]

Posts