Wma42

[kaibart]

Hi I’ve been out to a wma42p and the door lock light keeps flashing tried new door lock no difference any ideas pcb maybe? 😕

[electrofix]

Re: Wma42

very likely pcb

have you checked pcb for blown tracks or door lock triac damage?

not an unusual fault. sometimes if you hold the start button it will latch till you let go

Dave

[kaibart]

Re: Wma42

Haven’t inspected board but suspected it had gone as he has door lock changed before and I know the door locks on the wma range are prone to taking out pcb shame the board isn’t available,thanks good to have a 2nd opinion sometimes cheers kai

[electrofix]

Re: Wma42

board should be repairable by EMW

Dave

[kaibart]

Re: Wma42

I don’t use them anymore had problems with modules always being faulty and sending them back and foe.

[electrofix]

Re: Wma42

Ebay or QER then

Dave

[iadom]

Re: Wma42

Board is still available, C00202268. In stock at Masterpart. 😆

£65 + vat
Or even HERE for a little more. 😉

[reaper]

Re: Wma42

Check the spring on the door handle as well – often broken.

[kaibart]

Re: Wma42

Have tried pushing the door lock with screwdriver so not handle I wrote it off

[Author]

Posts