WMA44 manual.

[megawatt]

I hope some one can help. I am having low spin speed problems with a wma44 and need to check the programme. Has any one got a manual I can down load ?
Thanks in advance,
Mike.

[iadom]

Re: WMA44 manual.

If you can wait several hours I can sort it.

My main desktop PC finally died yesterday after 9 years of faithful service, never reformatted but it had ground to a virtual halt and refused to boot yesterday.

It had been on the cards for a while though.
New PC ordered online from Novatech at 4.00PM yesterday, arrived at 12.30PM this afternoon. 8)

Now I love my PC’s, had a BBC B/Acorn over 35 years ago but after 9 years with the old one, setting up a new unit, reloading all the software, trying to remember countless passwords etc. It’s a real ball ache and very time consuming. 🙁

If you don’t it from someone else before midnight then I will get it to you as soon as I can.

Jim.

[iadom]

Re: WMA44 manual.

Found a copy on my laptop, PM me an e mail address and i will get it to you.

[megawatt]

Re: WMA44 manual.

Thanks for your help. I am not sure if I have sent the pm to myself so here is my email address.

Regards,
Mike.

[iadom]

Re: WMA44 manual.

Removed your email address, got your message, info sent.

Exactly what is the problem you are having?

[megawatt]

Re: WMA44 manual.

Hopefully not much. The owner did not want to spend any money on it even though it only had a blocked pump. I have removed an object from the pump but on test the machine does not seem to get up to its full 1200 spin. I have continuity checked the motor from the module plug and replaced the module with a second hand one. My guess is that both modules may be set to 1000rpm. The bearings are as sweet as sweet and no rust on the case so its worth while saving.

[Author]

Posts