wma48 no spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wma48 no spin

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 15, 2015 at 8:28 pm #86397
    clockworkone
    Participant

    Replaced carbons in this machine. Now machine when on spin will only turn slowly clockwise and then anticlockwise in distribution mode. No ramp up or full spin. Checked wiring and pressure sw and tube. Did pr sw reset as I had machine tipped back to do carbons. Any ideas please.

    October 15, 2015 at 8:40 pm #431007
    iadom
    Moderator

    Re: wma48 no spin

    Pressure switch reset is nothing to do with these machines, only for the much later Indesit garbage.

    You could try and run THIS it may throw up a door not closed error but you never know.

    October 15, 2015 at 9:37 pm #431008
    clockworkone
    Participant

    Re: wma48 no spin

    Thank you Jim.

    October 15, 2015 at 9:50 pm #431009
    iadom
    Moderator

    Re: wma48 no spin

    Worth noting that the reversing distribution cycle on some these is quite long before going into spin.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.