WMA58 – What am I missing?

[aqua_serve]

Guys,

Been out to see a Hotpoint WMA58 that the customer informs me is overflowing through the soap dispenser. I have checked all the usual things that could cause this to happen and not found there to be any problem.

Unfortunately when I was there it didn’t overflow so it was impossible for me to see what was was actually happening! Therefore I left without charge.

The customer has since called me againand said that 4 washes after my visit the machine has done it again.

Could any of you point me in the right direction, your ideas would be appreciated!

Mark

[Simon46]

Re: WMA58 – What am I missing?

Have had a sock in the dispenser hose.

S.

[iadom]

Re: WMA58 – What am I missing?

Do you mean the machine is overfilling or is it pumpimg out of the drawer when it is on spin, or is it leaking on fill?

To high a water pressure can cause leaks from these drawers.

However if it is going into spin then throwing water out it has to be a problem with the sump/pressure chamber. If it was a normal blockage it should not go into spin if still full of water so something is preventing the pressure switch from sensing correctly.

Jim.

[Micky 32]

I have seen a few of these if the filter is blocked will go into a spin and throw the water out the soap box.

[Author]

Posts