wmb71442s none starter

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wmb71442s none starter

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 17, 2016 at 1:40 pm #88133
    simonb
    Participant

    Hi guys,

    Beko wmb71442s that is refusing to start cycle.

    door locks, just sits their dead no humming, nothing

    brushes are fine, pump has no blockages.
    its also intermittent as after checking the motor and messing with wiring connections but all seemed sound it then sprung to life, now its recalled although im not overly surprised…..


    Simon

    April 17, 2016 at 3:44 pm #437095
    simonb
    Participant

    Re: wmb71442s none starter

    now resolved……

    April 18, 2016 at 7:47 am #437096
    RHrepairs
    Participant

    Re: wmb71442s none starter

    What was the issue?

    April 19, 2016 at 12:12 am #437097
    simonb
    Participant

    Re: wmb71442s none starter

    replaced the pump, upto now its working fine, must have been intermittent pump failure…

    April 19, 2016 at 12:16 am #437098
    WhiteVanMan1
    Participant

    Re: wmb71442s none starter

    Interlock? Interlock connections? If not it looks as if it could be modular.
    Steve.

    Ah, just seen your second post. Must be an askoll 🙂

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.