worn oven markings

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #77859
    jjulieengland
    Participant

    Hi, I have an Ariston FB 521 single oven and all the markings have come off, any suggestions?

    Julie 😀

    #403646
    iadom
    Moderator

    Re: worn oven markings

    That model number is not recognised by the official parts software, please recheck and if possible give us all the numbers you can find on the rating plate.

    There are however three different models of FB51. Sadly the decal ( markings ) plate is part of the whole front surround, just over £72.00 :eeek:

    Caused by using abrasive cleaners in most cases.

    #403647
    jjulieengland
    Participant

    Re: worn oven markings

    Yes it is an fb51. It’s the model with 3 dials.

    Julie

    #403648
    don
    Moderator

    Re: worn oven markings

    Hi

    All three versions have three control knobs 😉 To make a positive ID we do need the all the numbers from the rating plate which is usually found where the door closes against the cabinet either bottom left or right hand corner.

    The serial number is the most important one 🙂


    Don

    #403649
    jjulieengland
    Participant

    Re: worn oven markings

    Thanks for that Don, but the sign is worn so I can not see the serial numbers.

    Julie

    #403650
    don
    Moderator

    Re: worn oven markings

    Hi

    Are you or someone else able to take the oven out and look at the back of the appliance? Sometimes there is a label there as well.

    Don

    #403651
    jjulieengland
    Participant

    Re: worn oven markings

    Yes I will get someone to take it out, thanks again.

    Julie

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.