WVD24520GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WVD24520GB/01

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 4, 2014 at 8:18 pm #79807
    simtoms
    Participant

    Hi folks,

    I’ve been to a Bosch WVD24520GB/01 today which, although the orange display illuminates, there are no digits or symbols showing up.
    Also none of the control panel functions illuminate.
    the options are a new main module, operating module or display module – all expensive items.
    Has anyone built up a track record of this fault and what caused it?

    Many thanks,

    SImon

    March 4, 2014 at 9:40 pm #410708
    Martin
    Participant

    Re: WVD24520GB/01

    Have you checked the ribbon connections between the boards?

    March 4, 2014 at 9:59 pm #410709
    simtoms
    Participant

    Re: WVD24520GB/01

    I have Martin, visually at least. And disconnected and reconnected.

    June 27, 2017 at 3:24 pm #410710
    chitts
    Participant

    Re: WVD24520GB/01

    Hi. Did anyone find the answer to this fault? I have been to one doing the same, and all the connectors seem fine I assume it’s the module. As the board was replaced a couple of years ago it seems odd!

    June 27, 2017 at 6:14 pm #410711
    timdowning
    Participant

    Re: WVD24520GB/01

    Motor brushes give a no display on these.

    June 30, 2017 at 3:44 pm #410712
    chitts
    Participant

    Re: WVD24520GB/01

    Thanks. Got to that eventually.

    June 30, 2017 at 3:46 pm #410713
    Martin
    Participant

    Re: WVD24520GB/01

    chitts wrote:Thanks. Got to that eventually.

    So, was it the brushes??

    July 1, 2017 at 10:52 am #410714
    chitts
    Participant

    Re: WVD24520GB/01

    Yes, but armature had dud segments, so write off after all.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.