wvh2836sgb/02 transit bolts left in

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wvh2836sgb/02 transit bolts left in

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 9, 2015 at 7:07 pm #83682
    DPDOM
    Participant

    Hi guys

    Been to a customer today with a brand new Bosch wvh2836sgb/02 washer dryer that tripped the rcd while bouncing around the kitchen with the transit bolts left in.
    The machine turns on but only displays dashes on the display and the start light is lit solid.
    There is no sign of any damage at all and the bolts are not even bent. I suspect its damages the module so how but just wondered if there is a way to unlock or rest the pcb.

    Any help appreciated.

    Dave

    January 9, 2015 at 10:51 pm #423434
    electrofix
    Moderator

    Re: wvh2836sgb/02 transit bolts left in

    have you tried the normal reset proceedure?

    dont know if it works on this machine but works on quite a few

    Dave

    January 10, 2015 at 11:29 am #423435
    Martin
    Participant

    Re: wvh2836sgb/02 transit bolts left in

    Try turning the power off. Then touch and hold the start button as you switch machine back on. 💡

    January 10, 2015 at 2:04 pm #423436
    DPDOM
    Participant

    Re: wvh2836sgb/02 transit bolts left in

    Tried the normal reset but will give the start button a try.
    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.