WXLS1650EU/04 – Drum doesn’t spin

[brukernavn32]

Siemens Siwamat XLS1650

E-Nr. WXLS1650EU/04
FD 8308 700388

Machine run program but drum motor doesn’t turn.

Is there a service mode entry or simelar I can enter to read out error codes?
Or any check points for my DMM ?

tia
regards
Hans

[gegsy]

Re: WXLS1650EU/04 – Drum doesn’t spin

Hi Hans
Have moved you to the European Forum ok 😀
This model does not show motor brushes/carbons as a spare, just a complete motor.
I am guessing that the brushes have worn down but without inspecting is difficult.
Unfortunately, we cannot give out specific tech data as most of it is copyright sorry.

If required the motor is p/no 143455. For an accurate diagnosis you may need to conatact a local Siemens engineer in your area.

Greg

[brukernavn32]

Re: WXLS1650EU/04 – Drum doesn’t spin

Thanks Greg

I’ll get my fingers dirty and see what I come up with 💡
I was hoping these new motors didn’t used brushes/carbons. Now I’m thinking it might be better if they did 😕

regards
Hans

[gegsy]

Re: WXLS1650EU/04 – Drum doesn’t spin

Hi Hans
Apologies to you. The motor is an inductive type, hence no brushes shown. 😳
This is quite an intensive machine so I would personally seek pro help rather than change expensive items. Obviously with the appliance unplugged look for poor connection from motor to module etc 😀

Greg

[Author]

Posts