Zan 914517353/01 ZWF1241W

[RocketMan]

Been to this today.

Turn on – nothing (no door lock sound) then lights run through as though in test….no other buttons work or do anything. Try to start in test mode…doesn’t work just lights as above.

Poss slight damp on motor 4-5Mohm.. disconnect motor block – no difference- just the light show as above……

Didn’t get a lot of time as light ran out… machine out in waterproof shed of caravan park. Customer got machine off a neighbour..yesterday….before neighbour moved last night!!

Did it work? I asked??… of course it worked, she (neighbour) told me so and she was ever such a nice lady she wouln’t lie!!!!..You’ve been had me thinks.

Hopefully back tomorrow in daylight if I’ve got time.

Any pointers appreciated.

Thanks Steve

[electrofix]

Re: Zan 914517353/01 ZWF1241W

nice fault have no idea but i had one this week with and e51 fault (shorted motor triac) motor measured .22 meg after drying with hair dryer got it to .75 meg and machine worked so your reading should not affect it

sounds like you need to pack a hair dryer and warm all machione electrics up and see what happens

hope you find it

Dave

[Author]

Posts