Zan FR1250W 91451600500

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zan FR1250W 91451600500

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 21, 2008 at 6:49 pm #36188
    goosegreen
    Participant

    Bit of a long shot but got a customer nagging me about if the end of cycle alarm buzzer and if can be turned off on the above model. I know on some Bosch machines you can do this, But don’t know about Zanussi Have had a look on TDS but can’t find anything. At least I can tell the customer I tried.


    Goose

    April 21, 2008 at 7:22 pm #249940
    Flyman
    Participant

    Re: Zan FR1250W 91451600500

    “By pressing the TEMPERATURE and SPIN SPEED
    buttons simultaneously, the acoustic signal is
    deactivated at the end of the cycle, when selecting
    the programmes and in case of an incorrect option
    selection .
    By pressing these 2 buttons again the acoustic signal
    is reactivated.”

    Out of the customers instruction manual. 🙂

    April 21, 2008 at 7:54 pm #249941
    goosegreen
    Participant

    Re: Zan FR1250W 91451600500

    Cheers Flyman, We both looked through the IM but could,t find any reference to disabling the end of prog alarm. Will call cust with the good news.

    Goose

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.