Zan top loader

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zan top loader

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 6, 2012 at 6:40 pm #68297
    pmb
    Participant

    Zannusi top Loader, TLE 1116
    Machine stops half way through Programme and start/pause light
    flashes, I had tightened connectors on PCB and checked Heater and Filter. But rang to say its still the same.
    I dont see many top loaders, Any Ideas

    March 7, 2012 at 1:18 am #370507
    leavemetogetonwithit
    Participant

    Re: Zan top loader

    Could be low insulation on heater element, or on motor if it’s when motor starts. By low we mean <40M.
    If not, try diagnostics. Should be on mediator.
    Mike.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.