zannusi tc7103 poor drying

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zannusi tc7103 poor drying

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 31, 2012 at 9:55 am #71234
    delta01
    Participant

    Hi this dryer heats up and has drum action but does not dry very well i changed the usual thermostat in front but no joy can any one help please thanks john

    August 31, 2012 at 10:01 am #380420
    Muv
    Participant

    Re: zannusi tc7103 poor drying

    Have had a few of these with that fault, in the end I changed the heater… And have had no return calls…

    Martin

    August 31, 2012 at 10:27 pm #380421
    stratfordgirl
    Participant

    Re: zannusi tc7103 poor drying

    Problems with air flow?

    September 1, 2012 at 6:59 am #380422
    captaincaveman1
    Participant

    Re: zannusi tc7103 poor drying

    Check that the vent on the outside of the house wall isn’t blocked and that the hose isnt crushed in any way.

    September 1, 2012 at 7:44 am #380423
    delta01
    Participant

    Re: zannusi tc7103 poor drying

    thanks guys the prob was the belt it sounded ok but obviously was not going round most machines sound different when belt gone, i’ll blame it on being stressed at the time

    thanks again for input

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.