- This topic has 1 reply, 2 voices, and was last updated 6 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi, my other washer needs a cable from the control dash panel to the control board, this is a four wire red harness with two wires pulled out. They can be redone but do not remember the sequence i.e. if it is a straight 1,2,3,4 to 1,2,3,4 connection or if there is a reversal. Any one can check and let me know please?
Many thanks.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.