zanussi DA6141 wont fill

[monkey]

I have been out to this about 6 times, the problem is the pressure switch keeps sticking and this allows the heater to come on without water in. If you take the pipe of the pressure switch it releases I cant find any blockage in the system although there is a bit of resistent when you blow through the pipe. you can connect it all back up it will work for couple of weeks then problem comes back. please help.

[lokring]

Re: zanussi DA6141 wont fill

i would strip down the presure system and wash it out ……if you blow down it your not realy able to know if its full of “crud” or soap scum i would remove and clean it mate…..

[Penguin45]

Re: zanussi DA6141 wont fill

Fill matrix will be partly choked.

15246240-03/6 will fix it, around £40 from most wholesalers.

Chris.

[lokring]

Re: zanussi DA6141 wont fill

a few years back i had a zanussi with one of those “poggs”in the presure chamber i visited it as engineer no8 coz it had been with 2 preure switches 2 timers and i had a cutomer with a very red face …….on very close inspection i found this “pogg” in the chamber, removed and tested it and hey presto! all fixed it cost the firm about £300 in wasted parts and all for something we could have charged the customer for. as it was a warranty call……….. 😀

[Author]

Posts