Zanussi Dishwasher No Hot Water

[Matthew Winslade]

Hi All,
I’m new to the forum and apologies if this is posted in the wrong section.
I have been having a mare with my dishwasher. Its a year old ( ironically i turned down the extended warranty two days ago). Its a Zanussi ZDF26011XA.
it only has a cold water supply. Recently it has not been getting hot. I assumed this to be the element or thermostat from what information i can find online. Before i call an engineer out i would like to try and save the money and just replace the parts myself. However …I cannot locate the items i nthe dishwasher itself. Does anyone have any drawings or exploded parts diagrams? Any help or advice on this would be hugely appreciated.
Thanks in advance.
Matthew”back to manual dish washing” Winslade

[electrofix]

Re: Zanussi Dishwasher No Hot Water

the heater on these models is mounted on the front of the main wash motor

but
it may be the heater. or a broken wire, or a thermostat fault, or a board fault

Dave

[Author]

Posts