ZANUSSI DRYER TDS 382W – Drum dropped, clothes ripped

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › ZANUSSI DRYER TDS 382W – Drum dropped, clothes ripped

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 13, 2010 at 10:53 pm #58828
    springchicken
    Participant

    Hi

    Several years old now, this machine is ripping clothes almost every wash now. The drum has about 7mm play in it, so it’s hanging away from the front of the machine, creating a large gap. I can pull it up manually, then the gap transfers to the top of the drum …
    Is this something that can be fixed, and is it worth the likely cost?

    Thanks

    Springchicken

    November 14, 2010 at 5:04 pm #335807
    helo_75
    Participant

    probably just wants a front seal… not a bad job, but takes time

    November 28, 2014 at 6:57 pm #335808
    Notallbad
    Participant

    Re: ZANUSSI DRYER TDS 382W – Drum dropped, clothes ripped

    Same dryer same problem.
    No front drum felt.
    Should there be anything else supporting the drum? There are no front drum bearings or drum supports either but should there be?
    Thankyou

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.