Zanussi E85

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi E85

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 15, 2011 at 5:32 pm #66279
    iadom
    Moderator

    FJR1254W..pnc.914516301-00

    Aborting to 3 mins in display within seconds of starting any wash programme.

    Diagnostics throws up E85.

    Circulation pump checks out electrically but plugged the wires onto a new pump just in case but still no go.

    All wiring appears sound, had a good pull at all that I could see.

    Apart from a duff PCB triac is there anything else that may be causing this?

    TIA.

    Jim.

    November 16, 2011 at 11:38 pm #363691
    leavemetogetonwithit
    Participant

    Re: Zanussi E85

    If it does spin only OK, you may find this thread useful
    http://www.ukwhitegoods.co.uk/forumsphpbb3/viewtopic.php?f=3&t=42784&hilit=+recirculation
    Mike.

    November 17, 2011 at 9:25 am #363692
    iadom
    Moderator

    Re: Zanussi E85

    This one would not actually go into spin, it just aborted to three minutes with the spin light on, no motor action of any kind.

    The machine wasn’t in the best of condition so she decided to retire it.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.