Zanussi FJS1225w PNC 914512801(00), err flashing and continu

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Zanussi FJS1225w PNC 914512801(00), err flashing and continu

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #45178
    nospin
    Participant

    ——————————————————————————–
    Hi, customer complained of err flashing on right hand side and loads of lights flashing. I ran machine on a rinse and it filled, but carried on washing with jet pump running constantly. After 15 mins err flashed and all 6 lights above fabrics button was flashing as well. it didn’t seem to me that it tried to empty.Am i right by saying that the jet pump runs all the time during all the washes and rinses or is it just for a while?
    Its an FJS1225w PNC 914512801(00), ser no 21200483

    Any ideas please gents?

    #283911
    nospin
    Participant

    Re: Zanussi FJS1225w PNC 914512801(00), err flashing and con

    Can anyone help me please?

    #283912
    LJDomestics
    Participant

    Re: Zanussi FJS1225w PNC 914512801(00), err flashing and con

    have u checked the element?

    #283913
    nospin
    Participant

    Re: Zanussi FJS1225w PNC 914512801(00), err flashing and con

    Yes i have and ok. I only ran it on a rinse and the jet pump was running all the time and drum was turning. Do you know if the jet pump runs all the time as i haven’t ever seen this model please?

    #283914
    bzz67
    Participant

    Re: Zanussi FJS1225w PNC 914512801(00), err flashing and con

    as far as i can see there are only 5 lights above the fabric button, not 6.

    this is the error code.
    L5 Heating (and, in Jetsystem models, circulation pump)

    circ pump appears to be on most of the time with water level detected.

    #283915
    nospin
    Participant

    Re: Zanussi FJS1225w PNC 914512801(00), err flashing and con

    Cheers, I’ll go back and have another look

    #283916
    nospin
    Participant

    Re: Zanussi FJS1225w PNC 914512801(00), err flashing and con

    Hi, went back, heater ok. all parts ok apart from lights flashing all over the place. Settled on getting him new machine as it is 7 yrs old. Was wondering that it wasn’t an element as i had already tested it and only selected the machine on a rinse. Thanks anyway for your help.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.