Zanussi FL1012 replacement Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FL1012 replacement This topic has 4 replies, 4 voices, and was last updated 19 years, 2 months ago by macmini. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts January 15, 2007 at 10:38 pm #24163 macminiParticipant Hi, My grandads trusty old Zanussi has died today, appears to be the timer, so not a worthy repair. I’ve recommended Bosch and Miele, obviously, but, the depth is too much. Does anyone know of a washer that is less that 55cm deep? Other than Indeshit and Beko? Cheers, Dan Oh, and it should be available from Comet because i get 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} off. January 16, 2007 at 4:07 pm #200916 timdowningParticipant Re: Zanussi FL1015 replacement Hoover hnl7126, hnl7146. 54 cm depth, 60 cm width. January 16, 2007 at 4:11 pm #200917 donModerator Re: Zanussi FL1015 replacement Hi Dan Bosch WLX24162 classixx 1200 spin and only 40cm deep. Only problem is it aint cheap 😯 Don January 16, 2007 at 4:23 pm #200918 kwattKeymaster Re: Zanussi FL1015 replacement macmini wrote:Oh, and it should be available from Comet because i get 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} off. Heh Dan, is that so you can buy at the same price you would from a local independent? 😉 😆 K. January 16, 2007 at 5:43 pm #200919 macminiParticipant Re: Zanussi FL1015 replacement kwatt wrote: macmini wrote:Oh, and it should be available from Comet because i get 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} off. Heh Dan, is that so you can buy at the same price you would from a local independent? 😉 😆 K. Hahaha. Yeah, probably 😉 Correction, it was an FL1012, but… we got a replacement today, it’s only used 3 times a week, i’ll not elaborate further though! 😳 Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In