zanussi fl1081 drum bearing

[craigybell]

The drum bearing for my zanussi fl1081 washer jneeds replacing after 9 years continuous use daily.Could you please tell me where I could get one.Also do you need any special tools to get the old bearing out?

type p6596303 prod no. 91478915/00

Thanks

[Dave_Conway]

Re: zanussi fl1081 drum bearing

The bearing kit is here:

http://www.ukwhitegoods.co.uk/modules.p … cts_id=430

You’ll also need the tub seal more than likely:

http://www.ukwhitegoods.co.uk/modules.p … cts_id=329

If you do a forum search for Zanussi and bearing you’ll find lots of info on doing the job, but be prepared as it’s a long winded affair on these 😉

Don’t forget to pull the plug before removing any panels :plug:

Dave.

[craigybell]

Re: zanussi fl1081 drum bearing

Just finished and working fine.Seems quieter on spin than ever.
Took nearly 4 hours but I was taking my time,marking wires etc
and a couple of glasses of wine along the way.
Inner bearing was smashed to pieces and took ages to get out.
Thanks for your help Dave.

Time for a few beers.

[Dave_Conway]

Re: zanussi fl1081 drum bearing

Nice one craigybell :tup:

Dave.

[Author]

Posts