Zanussi FLE1015W module configuration

[andy2]

Hi

This Zannusi had a motor short circuit (which is now sorted) that blew several tracks on the module. I have repaired the tracks but when i came to test it I discovered that it will not accept a program.

I have another known good module from an FJ1254W which i tried in but this threw up exactly the same response. The board looks exactly the same.

There is either still a problem elsewhere on the m/c (which I don’t think so) or

I seem to remember that these modules need to be configured for the model but never had this problem before.

Can anyone help please?

Andy 🙂

[Martin]

Re: Zanussi FLE1015W module configuration

andy2 wrote:Can anyone help please?

Yes!…check your email 🙂

[andy2]

Re: Zanussi FLE1015W module configuration

Thanks very much Martin

Thats excellent!

Andy 😀 😀 😀

[deltra]

Re: Zanussi FLE1015W module configuration

c’mon martin let me in on this please 😥

[Penguin45]

Re: Zanussi FLE1015W module configuration

The configuration secrets are all revealed on the TDS disc, which you can get for around £20 – possibly the best £20 you’ll ever spend.

Chris.

[andy2]

Re: Zanussi FLE1015W module configuration

Tried reconfiguring the repaired module but it would’nt have it. So bought a new module (ouch!). Fits it on the machine and it would’nt even set to diagnostic mode – so it looks like a control module problem too.

Tries in my ‘tester’ control module and machine now fires up but throws up an error – electronic pressure s/w defective.

Fits another p.s/w and machines working OK.

So the motor fault suceeded in wiping out the main module, control module and p.s/w too.

Electronic control solutions – don’t you just love em!

Andy 😥

[Author]

Posts