Zanussi FLE1216w

[SparkyP]

Hi Guys
Got a zanussi FLE1216W. Prod No. 914514537/00

This machine locks the door then flashes just one light which is the 2nd light from the top. It does not flash anything else. I have the TDS offline disk but still stumped. Any ideas much appreciated.

I do believe that the pump is ok. This is for a guy at work he has ordered the timer and fitted it and i had the user board for control panel and he fitted that……no luck.the timer was a configured one so we did not have to play around putting that in.

A Stumped
Sparkyp

[Dave_Conway]

Re: Zanussi FLE1216w

That’s an odd one, when did Zanussi suddenly pre-configure the boards 😕

Is it worth while re-configuring it perhaps ? Dunno if you can though.

Dave.

[SparkyP]

Re: Zanussi FLE1216w

Hi Dave

There is a note on the tds disc that says they had problems with non configured boards so they did them for you. We always get configured boards now. I think it is a communication error somewhere down the line. Will have to take my laptop to work and work thru this one.
Cheers
Sparkyp

[Flyman]

Re: Zanussi FLE1216w

Hello Sparkp,

If the light is flashing is it giving the error code E40 which is a problem with the door lock. Have you tried going into the fault system to see if it is showing a fault in that? 😕

[SparkyP]

Re: Zanussi FLE1216w

Hi Flyman
Just to let you know the door interlock has been changed. I have not had chance to have a real look at it myself yet. Will have to wait till next week now tho.
Cheers
Sparkyp

[Author]

Posts