Zanussi FLE1216W main pcb replacement.

[AMS]

pnc 91451453702

Had some problems with this machine (E94 for instance) which I diagnosed as a board problem. Sent it away to QER who informed me that the board was goosed and they could do nothing with it. Connect do a new board for a not too unreasonable £38 plus vat but it is not configured. I understood that due to problems with the user interface software, it was impossible to configure an unconfigured board on a machine without the display. Is this still the case? Is there a pre-configured board for this machine? If so, what is the part no?

p.s I have the configuration code

Cheers,

Dave

[Flyman]

Re: Zanussi FLE1216W main pcb replacement.

Hello Dave.
No pre-configured board for this model but you can configure the one you have. Should be part number 1321226704 or 1321226738. It is a bit of a pain to do if you have never done one before but can send details if you pm your e-mail. 🙂

[AMS]

Re: Zanussi FLE1216W main pcb replacement.

Thanks for the reply, Flyman. I’ll get a new board and give it a whirl. If I get any problems, I’ll be back 8) .

Dave

[Author]

Posts