Zanussi FX1465W prod 91479270500

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FX1465W prod 91479270500

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 29, 2005 at 5:52 pm #14368
    Bernie
    Participant

    Select any program and push start, door locks pump runs for one/two seconds then nothing until turning program dial off and back on then the same happens.

    Do not know what LED if any was flashing!

    The moulded plug had an earth fault on it changed the lead but fault is still there

    I have just got a copy of the diagnostics manual so have got to go back to this one after the New Year.

    Any help appreciated
    Bernie

    January 6, 2006 at 2:51 pm #159182
    Bernie
    Participant

    Re: Zanussi FX1465W prod 91479270500

    Just been back to this one fault code E54

    Possible fault:- PCB faulty/ current leakage from motor.

    It was motor down to earth.

    The brushes were damp inside the holders! Dried out refitted.
    Motor meggered out at 9.0M ohms although with out brushes I got a reading of 356M ohms (did not have any new ones on van)

    This machine was in a lean to on the side of the house “concrete floor”
    Hence the damp brushes.

    Sensitive Machines!

    How can any engineer work with out a Megger it like my right arm to me?
    I am lost without it.

    January 6, 2006 at 9:28 pm #159183
    squadman
    Participant

    Re: Zanussi FX1465W prod 91479270500

    Yep it beats me too as to how a engineer functions without a megger I could’nt do without mine !

    Squadman 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.