- This topic has 1 reply, 2 voices, and was last updated 19 years, 10 months ago by
.
-
Posts
-
About 15 months old.This machine seems to have a glaring design fault.When it finishes the cycle “end” light flashes and the door opens,but the door interlock is still switched on unless the programme switch is switched to O.Its a 4 tag interlock-a switch when the door is closed (2 red wires)and the lock when the programme switch is set. Customer hasnt been switching to O ,interlock has popped and pcb has two blown tracks(about £120 of parts to customer).Soldered the tracks but what odds that it works?
Oh the original call was “machine not working but ‘end’ light flashes 4 times stops another four times etc. and it had blown a fuse during the night when it wasnt in use”.I’d diagnosed a faulty interlock and a possible blown pcb before I’d put my toolbox down–I still have flashes of genius Im not past it yet!
- You must be logged in to reply to this topic.