Zanussi Lindo 300 Mod ZDC8202P Type TC09H65HW

[cords]

Hi All

Getting the old red lights and beeps whenever I try to start the dryer. Started about 6 months ago stopping in mid cycle and it’s slowly gone downhill to the point at which it won’t start at all. Holding down start and the key to its left results in 11 red flashes then 14 yellow ones, but I can’t work out how to decode that into a fault code. I would be very grateful for a steer please.

[electrofix]

comes up as a line sage relay fault. main board failure

take a close look at the board round the power relays. look for bad solder joint and hairline cracks in the board

Dave

[cords]

Thanks Dave – really appreciate you taking the time to research that. I think in practice that tells me it’s probably time to get a new one, sounds pretty serious!

[Author]

Posts