Zanussi oven element

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Zanussi oven element

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 4, 2014 at 5:22 pm #79364
    iadom
    Moderator

    is there a pattern equivalent for THIS from Qualtex or Masterpart?

    Model ZKC5030X1, pnc: 948514065

    Jim.

    February 4, 2014 at 5:25 pm #408939
    kwatt
    Keymaster

    Re: Zanussi oven element

    Qualtex reckons this one will suffice…

    http://shop.ukwhitegoods.co.uk/08261973 … en-element

    K.

    February 4, 2014 at 5:31 pm #408940
    iadom
    Moderator

    Re: Zanussi oven element

    Ta. 8)

    February 10, 2014 at 3:49 pm #408941
    iadom
    Moderator

    Re: Zanussi oven element

    Sadly Qualtex are wrong. :rolls:

    The 14SV02 element that I went along with this afternoon is too thick to fit through the hole in the back of the oven and it also has two threaded studs attached, the original is fixed by two screws from inside the oven cavity, I hadn’t spotted the studs on the picture. 😥

    February 10, 2014 at 4:19 pm #408942
    don
    Moderator

    Re: Zanussi oven element

    Hi Jim

    If you have no other offers, Elementman is cheaper than most here better still the price is all inclusive.

    Don

    February 10, 2014 at 5:18 pm #408943
    iadom
    Moderator

    Re: Zanussi oven element

    Thanks Don, forgot about them. :clown:

    February 10, 2014 at 10:22 pm #408944
    kwatt
    Keymaster

    Re: Zanussi oven element

    Now that’s most odd.

    Element dude lists that at lower than trade including shipping yet, other than the Qualtex alternatives I can’t find a pattern version. That seem a bit odd.

    There is another Ego one listed though Jim.

    K.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.