ZANUSSI S/L DISHWASHER MODEL DW20 TCR

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ZANUSSI S/L DISHWASHER MODEL DW20 TCR

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 8, 2011 at 6:10 am #60870
    richardable
    Participant

    The top basket support rollers have come off this appliance.
    i have 4 sets of item no. 50221870004 (electrolux). one for each roller position
    none of the parts in this sets seem to do the job working from the inside
    of the cabinet.
    i have been told that the d/w may need to come out and the kit
    fitted from outside to inside.
    any help on this one? ❓
    thanks
    richard
    able

    February 8, 2011 at 1:56 pm #343958
    servbland
    Participant

    Re: ZANUSSI S/L DISHWASHER MODEL DW20 TCR

    Lid off , and fit supports between side panel and tub . Normally the white supports are used and you get left with the rest ! The side panels do come off but a bit more work required . Hope this helps! 😆

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.