- This topic has 4 replies, 3 voices, and was last updated 20 years, 3 months ago by
.
-
Posts
-
My zanussi condenser/dryer recently stopped working. The start button appeared to not function anymore. After taking the top and front panel off, and removing the PCB, i noticed that the plastic button plate inside was cracked where the start button would normally depress and hit the switch on the PCB. As a temporary repair (and to avoid service repair costs as it was out of warranty), I removed the button and am able to poke something in to depress the PCB switch. However, I would ideally like to replace the plastic button plate and consider the machine ‘fixed’.
Any ideas where I can get hold of this part?!Re: Zanussi spares required
Model number would be a good place to start. 😉 Can you give us all the details from the rating plate, including the PNC number.
Re: Zanussi spares required
Info is a bit confusing – yellow button is p/no1251182-20/8, panel which it pushes on is 1251185-30/0.
Email to spares@ukwhitegoods.co.uk for pricing and ordering.
You have no chance of receiving these before Christmas………………..
Regards,
Penguin45.
- You must be logged in to reply to this topic.