Zanussi Tumble Drier Error E40

[DentedPorsche]

Hiyas,
As above giving E40 error code. Anyone know what this is and is there a diagnostic routine?

Model TCE7276W
PNC is 916716804 00

Thanks

Brian

[Dragan]

Re: Zanussi Tumble Drier Error E40

Diagnostic routine is next:

1.Switch ON by turning programme selector one step clockwise
2.wait until the LEDs light and buzzer sound,then simultanously press buttons START/PAUSE and DELICATE DRYING or HUMIDITY LEVEL -it is up to model.This must be done within 5s.
3.Hold this buttons until the LEDs begin to flash and the buzzer sonud

Regards,Dragan

[cab]

Re: Zanussi Tumble Drier Error E40

YOU HAVE MAIL

cab 😆

[DentedPorsche]

Re: Zanussi Tumble Drier Error E40

Thanks Cab. I’m sure the information will help.

Brian

[DentedPorsche]

Re: Zanussi Tumble Drier Error E40

Finally traced the problem to a broken plastic part between the push button (start) and the pcb mounted in the facia.
Anyone know the part number for this part or is it part of the facia?

Thanks
Brian

[cab]

Re: Zanussi Tumble Drier Error E40

125 11 85-30 / 0 have replaced loads of these for no start, but if the customer has tried to start machine with door open, last code stored e41, nowt to do with fault, yep very common carry as van stock!

cab

[Author]

Posts