Zanussi W/D dead no lights

[pmb]

Zanussi intergratted Washer Dryer Emx14440w 914602300
Power going in but dead and no lights, I think it most be PCB
The part number is 973914602300001
Does it come programmed ?
This was a nightmare to get out, Kickplate jammed, drain hose to short and jammed behind intergratted dishwasher, European type sink waste connections which fell apart when touched,
Recently made intergratted Machines the same Labour charge as freestanding,
Not sure that was good idea.

[Martin]

Re: Zanussi W/D dead no lights

You’ll need to quote for a PCB and an interlock at the very least before going further. Then time to whip out the PCB and check what blew it?

Don’t envy you the task TBH. 🙁

[pmb]

Re: Zanussi W/D dead no lights

I did check the Interlock but do you think that might have blown the PCB
If PCB is not pre programmed, I don’t wont to proceed.

[Martin]

Re: Zanussi W/D dead no lights

pmb wrote:I did check the Interlock but do you think that might have blown the PCB

Always worth checking first!

pmb wrote:If PCB is not pre programmed, I don’t wont to proceed.

Is is already configured. (…..just plug it in, switch on, stand well back! :clown: )

[Author]

Posts