Zanussi Washer dryer tripping RCCB once switched on.

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi Washer dryer tripping RCCB once switched on.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 27, 2013 at 7:48 pm #76406
    Teejay66
    Participant

    I did 2 loads that washed and dried fine and 5 minutes into the third load the machine tripped the RCCB in the main fuse box.
    This is the first time this has ever happened and I checked for leaks or a blown fuse and nothing was wrong. I reset the RCCB and turned the machine on again with the same result.
    Any one know what could be causing this? 😕

    July 28, 2013 at 9:38 am #398272
    Specialist01269
    Participant

    Re: Zanussi Washer dryer tripping RCCB once switched on.

    Possibly an Earth Fault on the main motor or Wash Heater. You would need an Insulation tester to narrow down the fault.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.