Zanussi WD1012

[timdowning]

I am after an obsolete part for this machine.

I need the timer cam. Its beige in colour. Its the part that provides the
teeth for the timer knob to engage into. I would give you the connect number but my password has lost its effect.

Thanks.

[suedehead1]

Re: Zanussi WD1012

5031680639247 is the connect part no. i will have a look in the morning i have a few of these but they all look the same and they are not in packing.

[aqualectric]

Re: Zanussi WD1012

For identification, the number on the cam itself ends in ***281. 😉

Steve.

[suedehead1]

Re: Zanussi WD1012

sorry tim i dont have one.

[robbra]

Re: Zanussi WD1012

Did you get one Tim?
Distriparts haven’t had any since last October but gave the part no as
5068211604.
Seems daft, they have the knob but not this and it’s a shame to scrap a good machine for the sake of it.
Other cams are available but would mess up the water flow b.
Robut she is very desparate and a bit skint.
Rob

[timdowning]

Re: Zanussi WD1012

No i’m afraid i didn’t.

New machine was supplied.

[robbra]

Re: Zanussi WD1012

Thanks.
looks like a new one here too

[leavemetogetonwithit]

Re: Zanussi WD1012

Can’t quite remember exactly how these things work but if she’s desperate why not leave the knobs off altogether and sell her a pair of long nosed pliers and a little training?
Mike.

[robbra]

Re: Zanussi WD1012

Nice one Mike but she is around 85 and don’t think she is up to it 😆

[leavemetogetonwithit]

Re: Zanussi WD1012

Poor old dear. It’s sad that people should be skint at that age. But I think quite a few of us will be 🙁 .
Mike.

[Author]

Posts