Zanussi ZCV667MWC (94890408800) Cooker Tripping Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZCV667MWC (94890408800) Cooker Tripping This topic has 5 replies, 4 voices, and was last updated 4 years, 1 month ago by jontymox. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts February 14, 2022 at 8:04 pm #100564 jontymoxParticipant Good evening all, The above cooker trips randomly, and I have found it does so when switching the top oven off, from a normal setting. The top oven heats perfectly well, so I suspect the selector switch. However, the switch appears good, so I wonder whether I should order a replacement switch, or look at other possibilities… jonty February 14, 2022 at 10:52 pm #481079 electrofixModerator still sounds like and element with an earth fault but a borderline one close to the value needed to trip the rcd Dave February 17, 2022 at 3:44 pm #481080 keithosParticipant Agree with Dave definitely an earth fault on element February 17, 2022 at 8:37 pm #481081 jontymoxParticipant Thanks chaps, Not returning to the above cooker until next Wednesday, as it’s in a Village Hall, and the caretaker is unavailable until then… Will Mega grill and hidden base elements, and hopefully confirm fault. jonty February 23, 2022 at 9:14 am #481082 mikehhaParticipant mine turned out to be the fan oven element It only did it occasionally and usually when turning the oven off. February 24, 2022 at 11:22 am #481083 jontymoxParticipant Revisited the cooker in question yesterday, and the double grill element was the cause. Confirmed by Mega Testing, and replaced element – all good. Thanks again all, jonty Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In