Zanussi zde46201w tumble dryer

[Galway]

Hi everyone.
Looked at this today. Totally dead. Continuity as far as pcb but no lights. Pcb looks OK.
New pcb or anyone any ideas?
Thanks
Niall

[electrofix]

Re: Zanussi zde46201w tumble dryer

open board and look for a green resistor on the mains input to the board after the switch
check resistance it should be 50 to 100 ohms or so

if blown you need to replace the resistor and power chip and may well work

plenty of examples here
simple-pcb-repair-tips-t51155.html

Dave

[Galway]

Re: Zanussi zde46201w tumble dryer

Thanks
I will have a look.

[Author]

Posts